Satin FX Metallic Topcoat

Metallic Floor With Satin FXSatin FX Metallic Flooring Topcoat is considered the ultimate metallic floor topcoat. A 91% (+/- 2%) solids, three-component aliphatic urethane floor finish that promotes excellent characteristics for abrasion resistance, chemical resistance, flexibility, weathering, and UV stability.

While Satin FX gives the absolute best protection for your metallic floors, it’s important to note that your metallic floors will far exceed your aesthetic expectations. A subtle shine that will last for years to come.

Satin FX has been installed on award-winning floors and continues to amaze contractors, homeowners, and DIYers alike. As an aliphatic urethane, it is primarily used on Xtreme FX metallic as well as other types of epoxy floors.

Epoxy FX recommends the Satin FX metallic […]

By |2021-03-27T16:56:02-05:00February 6th, 2021|Epoxy FX Products, Knowledge Base|0 Comments

Countertop FX Epoxy

Countertop FX Epoxy

Proudly Made In The USA! Countertop FX epoxy has been a trusted name in the epoxy coating industry since 2012. Heat resistant, virtually scratch-proof, and one of the most highly UV stable epoxies on the market today!

Creating epoxy countertops with Countertop FX epoxy is not only fun, but it has turned into one of the most lucrative businesses in the last 5 years.

With a little bit of practice, you too can create designs that will absolutely stun your customers!

Countertop FX epoxy can be used to mimic real granite, quartz, marble, soapstone, and solid surfaces. Each countertop is unique in its creation and can never be duplicated. […]

By |2021-03-27T17:03:55-05:00January 17th, 2021|Knowledge Base|0 Comments

Xtreme FX Metallic Flooring

Metallic Epoxy Floor

Xtreme FX Metallic floors are by far the most unique floors in the world. Why? Because no two floors are ever the same. No matter how hard you try, you could never duplicate a metallic floor!

Who can install a metallic floor? Absolutely anyone!!!

The key to a great metallic floor isn’t just putting epoxy on the floor and hoping for the best. It starts by using an epoxy that is specifically formulated just for metallic floors.

Our Xtreme FX epoxy for metallic flooring is a 100% solids epoxy that is easy […]

By |2021-03-27T17:03:39-05:00December 14th, 2020|Knowledge Base|0 Comments

What Is A Mil?

What is a Mil?What is a Mil? A mil is defined as one-thousandth of an inch. Easy enough, right? How many times have you read a technical data sheet only to see square footage measured in mil thickness? What exactly is a mil?

For those who use the same products over and over, it may be easy enough just to guesstimate how much material to use, but is that really a wise thing to do? Some materials require a very specific thickness, so let’s jump right in and gain some knowledge together.

When we use the term mil thickness we’re thinking of how many square feet we can get out of a coating at a […]

By |2021-03-27T17:05:33-05:00November 29th, 2019|Knowledge Base|0 Comments

Go to Top