Base Color FX

Base Color FX

$38.35

In stock (Message)

Base Color FX is a 100% solids, concentrated, tint system specially formulated for our 100% solids epoxies.

Use to tint the base coat for metallic floors, epoxy flake floors, or solid color epoxy floors. Choose from 14 different colors.

Description

Base Color FX is a 100% solids, concentrated, tint system specially formulated for our 100% solids Base Coat FX as well as our other 100% solids epoxies. Formulated with high-quality, ultra-fine particle pigments that easily disperse.

A superior choice to obtain a semi-transparent stain or a solid opaque colored finish for those sold color floors that are so popular.

With 14 beautiful colors to choose from, our color is an economical, easy, and decorative way to coat a variety of concrete substrates.

Easily disperses into our Base Coat FX.

Base Color FX

  • Used as the base coat for metallic floors.
  • Used as the base coat for epoxy flake floors.
  • Solid-colored epoxy floors.
  • Available in 14 colors.

Choose from the following colors: Light Gray, Medium Gray, Dark Gray, Charcoal, Off-White, Sun Buff, Arabian Sand, Canyon Clay, Brick Red, Buff, Tile Red, White, and Black.

Solids Content Concentrated
Pot Life N/A
Tack Free N/A
Foot Traffic N/A
Heavy Traffic N/A
Re-Coat Window N/A
Dry Appearance N/A
VOC Content N/A

Mixing

Mix the desired amount of Base Color FX in Part A of Base Coat FX or Xtreme FX Epoxy for 1-2 minutes. Mix at a slow speed to avoid introducing air into the products prior to mixing parts A & B. Material may separate during long term storage. Remix as needed.

*Color Needed

0 – 10 Mils: 2 Base Color FX per 3-gallon kit – 10 Base Color FX per 15-gallon kit
11 – 25 Mils: 1 Base Color FX per 3-gallon kit – 5 Base Color FX per 15-gallon kit

*Usage rates are only suggested amounts! Due to varying porosity, substrate, surface texture, and desired look, a test area is recommended to achieve the desired results.

Caution: Don’t add too much color! Apply to a test area prior to the job application for your desired appearance. Over pigmenting may cause color floating and/or streaking, especially with darker colors! Do not allow puddles! The average usage is 1 Base Color FX pint per 3 gallons of material for most opaque applications. For lighter colors it may take more and darker colors may take less depending on the application as well as the composition of the solvent-based acrylic sealer. Check Base Color FX for compatibility with the competitors’ 100% solids epoxy prior to use!

Title

Go to Top