• Countertop FX

    $103.97$893.97
    Countertop FX is a 100% solids epoxy used as a medium in creating beautiful metallic countertops. Usage is approximately 3-4 oz of Countertop FX for each coat. Available in 1, 3, and 10-gallon kits.
  • Xtreme FX

    $235.97$1,115.97
    Xtreme FX is a 100% solids epoxy for metallic floors. Xtreme FX has a 50-60 minute pot life allowing you the time to be creative. Combined with our Metallic 3DFX pigments, your metallic floors will have a marble-like effect. Available in 3 and 15-gallon kits.
  • Metallic 3DFX Pigment comes in 20 different colors. Each color can be used individually or in combination with multiple colors.
  • Satin FX

    $207.97
    Satin FX is a 93% solids, three-component aliphatic urethane floor finish that promotes excellent characteristics such as UV stability, abrasion resistance, chemical resistance, flexibility, and weathering.
  • Base Coat FX

    $179.97$722.94
    Base Coat FX is a 100% solids epoxy used as a medium for epoxy flake floors, epoxy chip floors, and solid-colored epoxy floors. Working time varies from 35 to 45 minutes according to conditions. Available in 3, 7 1/2, and 15 gallon kits.
  • Base Color FX is a 100% solids, concentrated, tint system specially formulated for our 100% solids Base Coat FX. Use to tint the base coat for metallic floors, epoxy flake floors, or solid color epoxy floors.
  • WB Prime FX

    $138.94$639.94
    WB Prime FX is a 1:1 ratio, 41% solids, water-based epoxy primer. It has been formulated to be a low odor, two-component, water-based epoxy primer for interior use. WB Prime FX provides excellent substrate penetration and is a suitable primer for most epoxies, urethanes, polyureas, and polyaspartic polyureas.
  • WB Color FX is a concentrated color designed specifically for our WB Prime FX. It comes in 6 standard colors for you to choose from. Used to easily tint WB Prime FX when used as a base coat/prime coat for metallic floors, epoxy flake floors, or solid color epoxy floors.
  • 421 WB Gloss FX

    $138.95$255.76
    421 WB Gloss FX is a high gloss, 40% solids, water-based aliphatic polyurethane with very low odor and multiple uses. Our 421 WB Gloss FX is an excellent choice as a topcoat for metallic floors, grind and seal floors, and many other interior applications where a low odor, high gloss, abrasion-resistant topcoat is desired.
  • 221 WB Matte FX

    $267.16$1,192.44
    221 WB Matte FX is a matte, water-based aliphatic polyurethane with very low odor and multiple uses. Our 221 WB Matte FX is the perfect choice as a topcoat for metallic floors, grind and seal floors, and many other interior applications where a low odor, matte, abrasion-resistant topcoat is desired.
  • Poly FX 100

    $266.22$1,242.45
    Poly FX 100 is a 1:1 super-fast setting polyaspartic polyurea. It is ideal for spaces where time is the main concern. It has a thicker viscosity, an extremely short pot life, and a super-fast return to service. It provides a high gloss clear coating and its superior penetration and bonding strength can provide years of abrasion, impact, and wear resistance.
  • Poly FX 90

    $268.94$994.57
    Poly FX 90 is a 1:1, 90% solids, low odor polyaspartic polyurea. Low viscosity, long pot life, and a fast return to service. UV Resistant.
  • Poly FX 80

    $251.97$908.99
    Poly FX 80 is a 1:1 polyaspartic polyurea used where a quick return to service is necessary. We utilize a special nanotechnology that allows for deep bonding to concrete, chemical resistance, and years of abrasion, impact, and wear resistance.
  • Poly FX 80S

    $293.97$1,099.97
    Poly FX 80S is a slow setting 1:1 polyaspartic polyurea. Typically used in larger spaces that require additional time to place material. We utilize specialized nanotechnology that allows for deep bonding to concrete, chemical resistance, and years of abrasion, impact, and wear resistance.
  • Poly Color FX is a concentrated color for our Polyaspartic Polyurea line of products (Poly FX 80, Poly FX 80S, Poly FX 90, and Poly FX 100). Sold in quart containers. Colors approximately 3-4 gallons of our Poly FX products.
  • SB Color FX is a very concentrated solvent-based (SB) coloring system. It has been specifically formulated for our solvent-based urethane. SB Color FX is formulated with extremely high quality, ultra-fine particle pigments. This makes it super easy to disperse in Poly Acrylthane FX. Sold in quart containers.
  • Poly Acrylthane FX is a 4:1, 50% solids, low viscosity, solvent-based acrylic urethane. Providing an extremely tough, scratch-resistant floor, it is UV resistant and provides a medium to high gloss finish for both indoor and outdoor applications. Sold in 1 1/4 Gallon Kits
  • Crack Repair FX

    $96.99$171.94
    Crack Repair FX is a very fast setting, high strength ultra low viscosity concrete repair material. Specifically designed to set quickly enough for heavy loads in 10-15 minutes.
  • MCU FX

    $159.36
    Satin FX is a single-component moisture-cured urethane (MCU) topcoat finish specifically formulated for use with our Xtreme FX epoxy. Available in 1-gallon units.
  • Grip FX

    $29.72
    Grip FX, an aluminum oxide, is an extremely tough mineral that's added to a wide variety of Epoxy FX products. Its primary function is for maximum added anti-slip protection.
  • Acetone FX is used in many applications within the coatings industry. Sold in 5 Gallon Buckets. Acetone FX is used as the medium for our interior floor dyes. Using Acetone FX to clean the surface of a coating can greatly increase cleanliness by removing extra fine dust particles. Acetone FX and Xylene FX is also used in some of our more popular topcoats to thin (Where allowed) and reduce flashing in hot regions.
  • Xylene FX is primarily used as a thinning agent in many applications within the coatings industry. Sold in 5 Gallon Buckets. Acetone FX and Xylene FX is also used in some of our more popular topcoats to thin (Where allowed) and reduce flashing in hot regions. Be sure to use proper PPE and get plenty of ventilation before use. Xylene FX is one of the most common chemicals produced in the United States.
  • MVB FX

    $139.94$1,186.99
    MVB FX is a 100% solids moisture vapor barrier, a high-performance epoxy primer system designed to reduce water vapor transmission. When applied to properly prepared concrete, MVB FX has shown to have improved adhesion to concrete surfaces where moisture is an issue and other high-performance coatings have failed. Covers approximately 85-100 square feet per gallon.
  • A typical system will yield an approximate dry film thickness of 15-30 mils. For best results, a 10-15 mils topcoat thickness is recommended to embed Floor Flakes and provide a durable wearing surface. Lab Tested Resin Compatibility • Epoxies • Methyl Methacrylates (MMA) • Moisture Cure Urethanes (MCU) • Polyaspartics • Polyureas • Polyurethanes • 100% Solids systems • Solvent-borne systems • Water-based systems • And others…
  • A typical system will yield an approximate dry film thickness of 15-30 mils. For best results, a 10-15 mils topcoat thickness is recommended to embed Floor Flakes and provide a durable wearing surface. Lab Tested Resin Compatibility • Epoxies • Methyl Methacrylates (MMA) • Moisture Cure Urethanes (MCU) • Polyaspartics • Polyureas • Polyurethanes • 100% Solids systems • Solvent-borne systems • Water-based systems • And others…
  • A typical system will yield an approximate dry film thickness of 15-30 mils. For best results, a 10-15 mils topcoat thickness is recommended to embed Floor Flakes and provide a durable wearing surface. Lab Tested Resin Compatibility • Epoxies • Methyl Methacrylates (MMA) • Moisture Cure Urethanes (MCU) • Polyaspartics • Polyureas • Polyurethanes • 100% Solids systems • Solvent-borne systems • Water-based systems • And others…
  • A typical system will yield an approximate dry film thickness of 15-30 mils. For best results, a 10-15 mils topcoat thickness is recommended to embed Floor Flakes and provide a durable wearing surface. Lab Tested Resin Compatibility • Epoxies • Methyl Methacrylates (MMA) • Moisture Cure Urethanes (MCU) • Polyaspartics • Polyureas • Polyurethanes • 100% Solids systems • Solvent-borne systems • Water-based systems • And others…
  • A typical system will yield an approximate dry film thickness of 15-30 mils. For best results, a 10-15 mils topcoat thickness is recommended to embed Floor Flakes and provide a durable wearing surface. Lab Tested Resin Compatibility • Epoxies • Methyl Methacrylates (MMA) • Moisture Cure Urethanes (MCU) • Polyaspartics • Polyureas • Polyurethanes • 100% Solids systems • Solvent-borne systems • Water-based systems • And others…
  • A typical system will yield an approximate dry film thickness of 15-30 mils. For best results, a 10-15 mils topcoat thickness is recommended to embed Floor Flakes and provide a durable wearing surface. Lab Tested Resin Compatibility • Epoxies • Methyl Methacrylates (MMA) • Moisture Cure Urethanes (MCU) • Polyaspartics • Polyureas • Polyurethanes • 100% Solids systems • Solvent-borne systems • Water-based systems • And others…
  • A typical system will yield an approximate dry film thickness of 15-30 mils. For best results, a 10-15 mils topcoat thickness is recommended to embed Floor Flakes and provide a durable wearing surface. Lab Tested Resin Compatibility • Epoxies • Methyl Methacrylates (MMA) • Moisture Cure Urethanes (MCU) • Polyaspartics • Polyureas • Polyurethanes • 100% Solids systems • Solvent-borne systems • Water-based systems • And others…

Title

Go to Top