• 221 WB Matte FX

    $267.16$1,192.44
    221 WB Matte FX is a matte, water-based aliphatic polyurethane with very low odor and multiple uses. Our 221 WB Matte FX is the perfect choice as a topcoat for metallic floors, grind and seal floors, and many other interior applications where a low odor, matte, abrasion-resistant topcoat is desired.
  • 421 WB Gloss FX

    $138.95$255.76
    421 WB Gloss FX is a high gloss, 40% solids, water-based aliphatic polyurethane with very low odor and multiple uses. Our 421 WB Gloss FX is an excellent choice as a topcoat for metallic floors, grind and seal floors, and many other interior applications where a low odor, high gloss, abrasion-resistant topcoat is desired.
  • Acetone FX is used in many applications within the coatings industry. Sold in 5 Gallon Buckets. Acetone FX is used as the medium for our interior floor dyes. Using Acetone FX to clean the surface of a coating can greatly increase cleanliness by removing extra fine dust particles. Acetone FX and Xylene FX is also used in some of our more popular topcoats to thin (Where allowed) and reduce flashing in hot regions.
  • Base Coat FX

    $179.97$722.94
    Base Coat FX is a 100% solids epoxy used as a medium for epoxy flake floors, epoxy chip floors, and solid-colored epoxy floors. Working time varies from 35 to 45 minutes according to conditions. Available in 3, 7 1/2, and 15 gallon kits.
  • Base Color FX is a 100% solids, concentrated, tint system specially formulated for our 100% solids Base Coat FX. Use to tint the base coat for metallic floors, epoxy flake floors, or solid color epoxy floors.
  • A typical system will yield an approximate dry film thickness of 15-30 mils. For best results, a 10-15 mils topcoat thickness is recommended to embed Floor Flakes and provide a durable wearing surface. Lab Tested Resin Compatibility • Epoxies • Methyl Methacrylates (MMA) • Moisture Cure Urethanes (MCU) • Polyaspartics • Polyureas • Polyurethanes • 100% Solids systems • Solvent-borne systems • Water-based systems • And others…
  • Countertop FX

    $103.97$893.97
    Countertop FX is a 100% solids epoxy used as a medium in creating beautiful metallic countertops. Usage is approximately 3-4 oz of Countertop FX for each coat. Available in 1, 3, and 10-gallon kits.
  • Crack Repair FX

    $96.99$171.94
    Crack Repair FX is a very fast setting, high strength ultra low viscosity concrete repair material. Specifically designed to set quickly enough for heavy loads in 10-15 minutes.
  • A typical system will yield an approximate dry film thickness of 15-30 mils. For best results, a 10-15 mils topcoat thickness is recommended to embed Floor Flakes and provide a durable wearing surface. Lab Tested Resin Compatibility • Epoxies • Methyl Methacrylates (MMA) • Moisture Cure Urethanes (MCU) • Polyaspartics • Polyureas • Polyurethanes • 100% Solids systems • Solvent-borne systems • Water-based systems • And others…
  • A typical system will yield an approximate dry film thickness of 15-30 mils. For best results, a 10-15 mils topcoat thickness is recommended to embed Floor Flakes and provide a durable wearing surface. Lab Tested Resin Compatibility • Epoxies • Methyl Methacrylates (MMA) • Moisture Cure Urethanes (MCU) • Polyaspartics • Polyureas • Polyurethanes • 100% Solids systems • Solvent-borne systems • Water-based systems • And others…
  • Grip FX

    $29.72
    Grip FX, an aluminum oxide, is an extremely tough mineral that's added to a wide variety of Epoxy FX products. Its primary function is for maximum added anti-slip protection.
  • MCU FX

    $159.36
    Satin FX is a single-component moisture-cured urethane (MCU) topcoat finish specifically formulated for use with our Xtreme FX epoxy. Available in 1-gallon units.
  • Metallic 3DFX Pigment comes in 20 different colors. Each color can be used individually or in combination with multiple colors.
  • MVB FX

    $139.94$1,186.99
    MVB FX is a 100% solids moisture vapor barrier, a high-performance epoxy primer system designed to reduce water vapor transmission. When applied to properly prepared concrete, MVB FX has shown to have improved adhesion to concrete surfaces where moisture is an issue and other high-performance coatings have failed. Covers approximately 85-100 square feet per gallon.
  • A typical system will yield an approximate dry film thickness of 15-30 mils. For best results, a 10-15 mils topcoat thickness is recommended to embed Floor Flakes and provide a durable wearing surface. Lab Tested Resin Compatibility • Epoxies • Methyl Methacrylates (MMA) • Moisture Cure Urethanes (MCU) • Polyaspartics • Polyureas • Polyurethanes • 100% Solids systems • Solvent-borne systems • Water-based systems • And others…

Title

Go to Top